ARCHOS TV Plus 500973 - Manual (Page 66)

MANUAL V1.0
TV+
THE TV PROGRAM GUIDE > P. 66
“Key: -/--”: Set to “
On
” if normally, you need to press a special key on your tuner’s remote control before
entering a channel with several digit numbers (that is to say a channel greater than 9). This key is often
represented with this symbol: “-/--”.
“Switches on with”:
see below.
“Time until video”: see below.
If the ARCHOS did not manage to switch your tuner to the selected channel,
you can try using a different ON/OFF code (see: 1
st Test: turning your tuner off)
DQGGRWKH nd test again.
After you selected “
Yes
” at the end of the 2 nd step, the following screen appears.
You will have to set these two parameters:
“
Switches on with
”: this depends on what key you normally press, on your
tuner’s remote control, to turn it on. If you normally press the “
Power
” key,
select “
Power
”. If you can press any channel key, then select “
Any channel
”. If
you can press any key, select “
Any key
”.
“
Time until video
”: select the amount of time it normally takes between the
moment you turn on your tuner, and the moment the image appears on your
TV (“
0...10 seconds
”, “
10...30 seconds
”, “
>30 seconds
”).
9JGP[QWJCXGÒPKUJGFUGNGEVm
Done
nCPFCEQPÒTOCVKQPOGUUCIGYKNNCRRGCT
Select “
OK
”.
9.5 SCHEDULING YOUR RECORDING
In the Home screen, select the
“
Recorder
” icon to display the
ARCHOS TV Program Guide.
This screen’s menu items will al-
low you to choose a different day,
update the Program Guide data, or
change various settings (program
guide update and channel list con-
ÒIWTCVKQP 

2.
-
-
-
3.
-
-
4.