Aiwa XR-EM20 - Manual (Page 15)

15
En
Side A
Tab for side A
8 Hold down SHIFT and press CD EDIT/CHECK once
to switch back to side A.
9 Press REC/REC PAUSE once.
The tape is rewound to the beginning of side A. "REC
MUTE
" flashes on the display and the lead segment is
played through for 10 seconds, and recording starts.
Go to the next step when recording on side A finishes.
On the remote control, hold down SHIFT and press REC/
REC PAUSE to start recording.
10 Hold down SHIFT and press CD EDIT/CHECK once
to switch to side B.
11 Turn over the tape and press REC/REC PAUSE
once.
Recording on side B starts in the same way as side A.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, hold down SHIFT and press
CD EDIT/CHECK on the remote control to select side A or
B.
2 Press f or g repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Hold down SHIFT and press CD EDIT/CHECK on the remote
control to select side A or B, and press s to clear the program
for the selected side. Then, select tracks again.
To clear the edit program
Press s twice.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.