Aiwa XR-EM20 - Manual (Page 5)

5
En
PARTS AND CONTROLS
Main unit
4 s CLEAR
CD and Tape: stops playback.
Radio: clears a preset station.
5 PHONES jack
Plug in optional headphones set with a stereo mini plug
(ø3.5 mm). Speaker output is canceled.
6 VOLUME
Adjusts the volume etc..
7 TONE
Selects the sound adjusting mode, "BAS" (bass) or
"TRE" (treble).
8 DISPLAY
Changes the display in CD playback mode.
2
1
7
9
8
6
5
3
4
0
!
@
#
$
1 c TAPE (REC MUTE)
Starts playback.
Also used to enter 4-second blank spaces during
recording.
TUNER/AUX/BAND
Selects Radio function and the radio band.
Also selects the function of external equipment connected
to AUX IN jacks.
E CD
Starts and pauses CD play.
2 POWER 6 STANDBY/ON
Switches the unit on and off (standby).
3 REC/REC PAUSE
Starts and pauses recording.
SYNCHRO REC
Starts recording and CD play simultaneously.
9 f / r , t / g (TUNING DOWN, UP)
CD: skips to a previous or a succeeding track when
pressed, searches a track in fast forward or reverse
playback when held down.
Tape: rewinds or fast forwards the tape.
Radio: manually tunes up or down within the band.
0 AM LOOP jack and FM 75
Ω
terminals
Connect the supplied AM and FM antennas.
! SUB WOOFER 3 jack
Connect optional powered sub woofer with a built-in
amplifier to the jack.
@ AUX IN jacks
Accept analog sound signals from external equipment.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to R jack, white
plug to L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press TUNER/AUX/
BAND repeatedly.
# SPEAKERS 3 terminals
Connect the speaker cords of the supplied speakers.
$ AC power cord