LG WM3477HS - Manual (Page 12)

I N S TA L L AT I O N I N S T RU C T I O N S
CONNECTING THE WATER LINES
3 Attach the hot water line to the hot water
faucet. Attach the cold water line to the cold
water faucet.
Tighten the fittings securely. Open the water
faucets fully to check for leaks.
Water Tap
NOTE:
• For your safety, and for extended product life,
use only authorized components. The manufac-
turer is not responsible for product malfunction
or accidents caused by the use of separately
purchased, unauthorized parts.
• Use new hoses when you install the washing
machine. Do not reuse old hoses. Use only the
inlet hoses provided with the washer. LG does
not recommend the use of aftermarket hoses.
• Periodically check the hoses for cracks, leaks
and wear, and replace the hoses every 5 years.
• Do not stretch the water hoses intentionally, and
make sure that they are not crushed by other
objects.
• Water supply pressure must be between 14.5
psi and 116 psi (100~800 kPa). If the water sup-
ply pressure is more than 116 psi, a pressure
reducing valve must be installed.
• To provide optimum washing performance the
hot water temperature should be set at 120-
135°F (48-57°C) and the cold at 60°F (15°C).
Insert a rubber seal into the threaded
fittings on each hose.
2
Rubber Seal
Water Hose
(to tap)
Rubber Seal
Water Hose
(to water inlet
on washer)
or
Rubber Seal
Water Hose
(to water inlet
on washer)
11
NOTE: Do not cross-thread the hose fittings.
Attach the hot water line to the red hot water
inlet on the back of the washer. Attach the
cold water line to the blue cold water inlet on
the back of the washer. Tighten the fittings
securely.
1
Hot water tap
Cold
water
tap
Water
Inlets