LG VX11000 - Manual (Page 110)

SETTINGS & TOOLS
108
Sensitivity Adjust the sensitivity as
More Sensitive / Automatic/ Less
Sensitive.
Adapt Voice If the phone asks you
to repeat your voice command too
often, train the phone to recognize
your voice patterns.
Train Digits/
Train Words
Prompts Mode/ Audio Playback/
Timeout For Mode, set Prompts/
Readout + Alerts/ Readout/ Tones
Only. For Audio Playback, set
Speakerphone or Earpiece. For
Timeout, set 5 seconds or 10
seconds.
CLR Key Activation If set to On, this
setting allows you to activate Voice
Command using the external
.
Using the External Touch Screen
1. Unlock the Touch Screen by
sliding the image up to
unlock or press the Unlock Key
( ) on the left side of your phone
and touch to access the menu.
2. Touch the Settings & Tools icon .
3. Touch Tools.
4. Touch Voice Commands.
To customize your voice commands,
touch and
SETTINGS.
Confirm Choices Automatic/
Always confirm/Never confirm
Sensitivity More Sensitive/
Automatic/ Less Sensitive.
Adapt Voice Train Digits/ Train
Words
Prompt Mode Prompts/ Readout +
Alerts/ Readout/ Tones Only
Audio Playback Speakerphone/
Earpiece
Prompt Timeout 5 seconds/ 10
seconds
CLR Key Activation ON/ OFF
Info
2.1.1 Call <Name or Number>
Say "Call" and then call someone
simply by saying the phone number or
name. Please speak clearly and
exactly as in your Contacts list. When
you have more than one contact
number, you can state the name and
number type of the contact (for
example, 'Call John Work').
2.1.2 Send Msg to <Name or Number>
Say 'Send Message' and the voice
command will prompt you for the type
of message. After choosing the
message type, system will ask you for
the contact name, number or group. It
will automatically start a message. If
you say a full-sentence command,
such as 'Send Message to Bob', it
VX11K_Eng_100225(1.3).qxd 3/4/10 10:36 AM Page 108