LG VX11000 - Manual (Page 185)

183
better/higher of the two ratings.
Hearing devices may also be rated.
Your hearing device manufacturer or
hearing health professional may help
you find this rating. Higher ratings
mean that the hearing device is
relatively immune to interference
noise. The hearing aid and wireless
phone rating values are then added
together. A sum of 5 is considered
acceptable for normal use. A sum of
6 is considered for best use.
In the above example, if a hearing
aid meets the M2 level rating and
the wireless phone meets the M3
level rating, the sum of the two
values equal M5. This should
provide the hearing aid user with
“normal usage” while using their
hearing aid with the particular
wireless phone. “Normal usage” in
this context is defined as a signal
quality that’s acceptable for normal
operation.
The M mark is intended to be
synonymous with the U mark. The T
mark is intended to be synonymous
with the UT mark. The M and T
marks are recommended by the
Alliance for Telecommunications
Industries Solutions (ATIS). The U
and UT marks are referenced in
Section 20.19 of the FCC Rules. The
HAC rating and measurement
procedure are described in the
American National Standards
Institute (ANSI) C63.19 standard.
To enter that the Hearing Aid
Compatibility rating for your phone is
maintained, secondary transmitters
such as Bluetooth and WLAN(this
phone does not have WLAN)
components must be disabled during
a call. See Page 91 for instructions
to disable these components.
M 3 + M 2 = 5
T 3 + T 2 = 5
VX11K_Eng_100225(1.3).qxd 3/4/10 10:36 AM Page 183