LG ND8520 - Manual (Page 11)

Getting Started 11
Ge
tting S
tar
ted
1
Setting the Clock
If the power has been interrupted or the
power plug has been disconnected, the clock
setting is erased.
,
Note
Setting the Clock
Automatically
y Make sure that your iPod/iPhone/iPad
or your Android device has set the clock
correctly.
y In standby mode, the clock will not
synchronize with your iPod/iPhone/iPad or
your Android device.
y In auto clock synchronization, “LG Bluetooth
Remote” app has priority over the docking
system.
y The 24 hour format can be set only for
Android OS.
,
Note
Setting the Clock by Synchronizing
with Your iPod/iPhone/iPad
Connect the iPod/iPhone/iPad firmly. Then the
clock setting in the control panel will synchronize
with your iPod/iPhone/iPad.
The synchronized time may be slightly
different from that of your iPod/iPhone/iPad.
,
Note
Setting the Clock through “LG
Bluetooth Remote” App
Install “LG Bluetooth Remote” app on your iPod
touch/iPhone/iPad or your Android device. (see
page 27-28)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth
connection through “LG Bluetooth Remote” app.
Setting the Clock Manually
If necessary, you can set the clock manually.
1. Press and hold Clock on the back panel for two
seconds.
- The clock digits begin to blink.
2. Press / to select the 12/24 hour format.
- 12:00 (for a PM display) or 0:00 (for a 24 hour
display)
3. Press .
- The hour digits begin to blink.
4. Press / to set the hour.
5. Press .
- The minutes digits begin to blink.
6. Press / to set the minute.
7. Press .
If you want to reset the clock, repeat steps 1-7.
,
Note
ND8520-FA.BUSALLK_ENG.indd 11 12. 6. 28. �� 9:17