Using airplay – LG ND8520 User Manual

Page 13

Advertising
background image

Operating

13

Oper

ating

2

Using AirPlay

Apple AirPlay technology enables you to play your
iTunes music library, hosted on a Mac, PC, iPhone,
iPod touch, or iPad on any AirPlay-enabled device
(for example, your ND8520) connected to the Wi-Fi
network.

To stream audio wirelessly by AirPlay, you need :

y A Wi-Fi certified router

y A host for your iTunes music library, for example,

an iPod touch/iPhone/iPad installed with iOS
4.3.3 (or later) or a Wi-Fi enabled PC/Mac installed
with iTunes 10.2.2 (or later)

Compatible iPod/iPhone/iPad
The unit supports the models as follows ;

y iPod touch 3G, 4G

y iPhone 3GS

y iPhone 4 / iPhone 4S

y iPad / iPad 2

This unit should be connected to the same local

network as your iTunes host device through the

Wi-Fi router.

Depending on the kind and operating system
or the application’s version and the setting
status of AirPlay-enabled device connected to
this unit, AirPlay may not be operated normally.

,

Note

Connect to your home Wi-Fi network

for AirPlay

To connect this unit to your existing home
Wi-Fi network, you need to apply your home Wi-Fi
setting to this unit.

Once connected successfully, this unit will
remember your home Wi-Fi settings. Then you
can enjoy AirPlay whenever this unit is powered
on and connected to your home Wi-Fi network
automatically.

Before connection of this unit to your home Wi-Fi
network, check the points below.
1. Make sure that your Wi-Fi router is powered on

and working properly.

2. Make sure that this unit has been powered on

and booted up successfully.

Connecting to your home Wi-Fi

router

To connect this unit to a Wi-Fi router, you need
access to this unit’s built-in configuration web page
for change of its internal Wi-Fi settings. To do so,
you need a Wi-Fi enabled device with an Internet
browser for temporary Wi-Fi connection to this unit.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.

Follow the sequence below for connection of

this unit to your home Wi-Fi router
1. Collect settings of your home Wi-Fi router and

write down on paper for use during this unit Wi-
Fi setup (see “Collect settings of your home Wi-
Fi router” on page 14).

2. Switch this unit to Assisted Wi-Fi Setup mode

(see “Switch this unit to Assisted Wi-Fi Setup
mode” on page 14).

- A new Wi-Fi network created by this unit will

appear, with the network name (SSID) of “LG
AUDIO Setup XXXXXX”.

3. Connect your Wi-Fi enabled device to the

created new Wi-Fi network temporarily (see
“Connect your Wi-Fi enabled device to the
newly created Wi-Fi network” on page 15).

4. Open the built-in web page of this unit with the

Internet Browser of your Wi-Fi enabled device
(see “Open the built-in web page of this unit” on
page 17).

5. Connect your unit (ND8520) to the available

Wi-Fi network based on the settings you wrote
on paper at step 1 (see “Connect your unit
(ND8520) to the available Wi-Fi network” on
page 18).

6. Restore your Wi-Fi enabled device back to your

existing home Wi-Fi settings (see “Restore your
Wi-Fi enabled device back to your existing
home Wi-Fi setting” on page 20).

ND8520-FA.BUSALLK_ENG.indd 13

12. 6. 28. �� 9:17

Advertising