LG ND8520 - Manual (Page 14)

Operating 14
Oper
ating
2
Collect settings of your home Wi-Fi
router
Always consult the user guide of your home
Wi-Fi router for detailed instructions.
,
Note
1. Connect your Wi-Fi enabled device to your
existing home Wi-Fi network.
2. Launch the Internet browser (for example,
Apple Safari or Microsoft Internet Explorer) on
your Wi-Fi enabled device.
3. Open the configuration page of your home
Wi-Fi router.
4. Find the Wi-Fi settings tab and write down the
following information on paper :
- Network name (SSID)
- Wi-Fi security mode (usually WEP, WPA or
WPA2 if enabled)
- If the security mode of your home Wi-Fi
router is “WEP”, this unit supports only “OPEN”.
- Wi-Fi password (if Wi-Fi security is enabled)
- DHCP mode (enabled or disabled)
- Static IP address settings (if DHCP mode is
disabled)
Switch this unit to Assisted Wi-Fi
Setup mode
1. Press PFUNCTION or P to select “AIR”
function.
2. Press and hold, and release on the control
panel of this unit until “STEP1” message appears.
- Airplay icon blinks and “STEP1” message
appears on the control panel of this unit.
- A new Wi-Fi network of this unit itself is
created, with the network name (SSID) of
“LG AUDIO Setup XXXXXX”.
- It takes about 30 seconds and more for
successful creation of this new Wi-Fi network.
After you finish manual Wi-Fi setting for this
unit, this new Wi-Fi network disappears.
,
Note
ND8520-FA.BUSALLK_ENG.indd 14 12. 6. 28. �� 9:17