3 system setting, Initial setup, 25 initial setup – LG LAB540W User Manual

Page 25

Advertising
background image

3

System Setting

System Setting

25

S

ys

tem Se

tting

3

Initial Setup

When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press 1 (POWER).

The initial setup wizard appears on the screen.

2. Use W/S/A/D to select a display language

and press ENTER (b).

3. Read and prepare the preparations for the

network settings and then press ENTER (b)

while [Start] is highlighted.

If wired network is connected, the network
connection setting will automatically be
finished.

4. All available networks are displayed on the

screen. Use W/S to select [Wired Network]

or desired SSID of wireless network and press
ENTER (b).

If you have security on your access point, you
need to input the security code as necessary.

5. Use W/S/A/D to select the IP mode

between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.

6. Select [Next] and press ENTER (b) to apply

network settings.

Network connection status is displayed on the
screen.
For details on network settings, refer to
“Connecting to your Home Network” on page
20.

7. Select [Next] and press ENTER (b).

Advertising