LG LAB540W - Manual (Page 26)

System Setting 26
S
ys
tem Se
tting
3
8. You can listen to TV sound through this unit’s
speaker automatically when TV is turned on. TV
and this unit should be connected with optical
cable.
Press W to move and press A/D to select [On]
or [Off ]. Select [Next] and press ENTER (b).
9. Check all the settings that you have set in the
previous steps.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).
10. Displays private sound mode guide. Press ENTER
(b).
Settings
Adjust the setup settings
You can change the settings of the player in the
[Settings] menu.
1. Press HOME ( ).
2. Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
3. Use W/S to select the first setup option, and
press D to move to the second level.
4. Use W/S to select a second setup option, and
press ENTER (b) to move to the third level.
5. Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.