Directory storage, 16 calls 5 new, Christine smith – AT&T CL4939 User Manual

Page 37: Robert brown, Enter number, Enter name, Stored

Advertising

Directory

Directory storage

Use the following steps to store a name and
telephone number in the directory.

When the telephone is idle, press

DIR/ to enter

the directory.
Press

SELECT. The screen shows ENTER NUMBER.

To copy the last number dialed, press
REDIAL/

PAUSE

(up to 24 digits).

-OR-
Use the dial pad keys to enter the telephone
number (up to 24 digits).

To backspace and erase a digit, press

REMOVE.

To insert a four-second dialing pause, press

REDIAL

/PAUSE. A P appears on the screen.

Press

SELECT. The screen shows ENTER NAME.

Use the dial pad keys and

Character chart on

page 30 to enter the letters, digits or symbols (up
to 15 characters). Press the key repeatedly until
the desired character shows on the screen.

To backspace and erase a character, press
REMOVE.

Press

SELECT to save the entry. The screen

shows

STORED with a confirmation tone and

then returns to the directory.
Repeat steps 2 through 6 to store more directory
entries.
-OR-
Press

FLASH to return to idle mode.

NOTES:

If you copy or enter more than 24 digits in a
telephone number in step 3, the screen shows

ONLY 24 ALLOWED with an error tone.
If you enter more than 15 characters in a name
in step 5, the screen shows

ONLY 15 ALLOWED

with an error tone.
If there are already 25 stored entries, after
you press

SELECT in step 2, the screen shows

MEMORY FULL with an error tone and then
returns to the directory.

2.
3.

•
•

4.
5.

•