AT&T CL4939 - Manual (Page 59)

53
Appendix
Troubleshooting
If you have difficulty with your telephone, please try the suggestions below.
For customer service, or to purchase accessories or replacement parts, visit
our website at
www.telephones.att.com
, or call
1 (800) 222-3111
.
In Canada, dial
1 (866) 288-4268
. Have the serial number, found on the
underside of your telephone, available when contacting customer service.
Please retain your receipt as your proof of purchase.
My telephone
appears to be dead. Make sure the power adapter is securely plugged into
an electrical outlet not controlled by a wall switch.
Unplug the power adapter from the electrical outlet.
Wait for approximately 15 seconds, then plug it in
again. Allow up to one minute for the telephone to
synchronize.
Disconnect the telephone base from the telephone
wall jack and plug in a working telephone. If this
telephone does not work, the problem is probably
in the wiring or the local service. Call the telephone
service provider. •
•
•
There is no dial tone. First, try all suggestions in My telephone appears
to be dead on this page.
The telephone line cord might be malfunctioning. Try
installing a new telephone line cord.
Make sure the coiled handset cord is securely installed
between the handset and the telephone base.
Disconnect the telephone base from the telephone
wall jack and connect a different telephone. If there
is no dial tone on that telephone either, the problem
is in your wiring or local service. Contact your
telephone service provider (charges may apply).
•
•
•
•
Appendix