Starting the bootp server on an hp or sun system – Agilent Technologies J3972A User Manual
Page 99
Bootp Server Configuration
Bootp Server Setup on an HP or Sun System
79
Starting the Bootp Server on an HP or Sun System
You can start the Bootp server on an HP or Sun system in one of the following
ways. Refer to “Configuring the Bootptab File” on page 87 if you need to
configure the bootptab file.
Bootp for Solaris is shipped on the NetMetrix CD-ROM but it is not part of the
operating system.
standalone. Become superuser and give one of the following commands:
z
/etc/bootpd -s
for HP-UX v.
9.x
z
/usr/lbin/bootpd -s
for HP-UX v.
10.x & 11.x
z
/usr/netm/sun4s/bootpd -s
for Solaris
inetd. Become superuser and use the following procedure:
1. Edit the file
/etc/inetd.conf
. Search for a line like the following and
ensure that the line is uncommented (does not contain a # character). If
necessary, add the line to the file.
bootps dgram udp wait root path/bootpd bootpd
Where
path
is one of the following:
/etc
for HP-UX v.
9.x
/usr/lbin
for HP-UX v.
10.x & 11.x
/usr/netm/sun4s
for Solaris
2. For HP-UX, give one of the following commands to force inetd to re-read
the inetd.conf file that you modified in Step 1:
/etc/inetd -c
for HP-UX v.
9.x
/usr/sbin/inetd -c
for HP-UX v.
10.x & 11.x