Warning – LG WM3570HWA User Manual

Page 17

Advertising
background image

17

ENGLISH

INSTALLATION INSTRUCTIONS

Plugging in the power cord and

grounding

Make sure to ground the washing machine to

prevent a short circuit or an electric shock when

plugging in.

Using a 3-prong outlet

Plug in the electrical outlet without additional

grounding.

WARNING

y

The power outlet must be within 60 inches (1.5 m)

of either side of the washer.

y

The appliance and outlet must be positioned so

that the plug is easily accessible.

y

Do not overload the outlet with more than one

appliance.

y

The outlet must be grounded in accordance with

current wiring codes and regulations.

y

A time-delay fuse or circuit breaker is

recommended.

y

It is the personal responsibility and obligation

of the product owner to have a proper outlet

installed by a qualified electrician.

y

Do not use a worn or damaged power cord or

power plug. Replace or repair it immediately.

Failure to do so may result in death, fire, electric

shock, or malfunction.

y

Do not modify the power cord and take care not to

damage it when installing or moving the washing

machine. Failure to do so may result in death, fire,

electric shock, or product malfunction.

y

Make sure that the washing machine is grounded.

y

Connect this washing machine to a grounded

outlet conforming to the rating prior to use.

Failure product to do so may result in fire, electric

shock, or product malfunction.

y

Do not use adaptors or extension cords. The

washing machine should always be plugged

into its own individual electrical outlet which has

a voltage rating that matches the rating plate.

Failure to do so may result in fire, electric shock

or disorder.

y

Do not damage or cut off the ground prong of

the power cord. Doing so may cause death, fire,

electric shock, or product malfunction.

Test run

Check if the washing machine is properly installed

and run a test cycle.

1

Load the washing machine with 6 pounds of

laundry.

2

Press

A

and turn

B

on the right.

3

Press

to Rinse+Spin.

4

Press

C

.

- The wash cycle starts.

5

Check if water is supplied, that the washing

machine does not rock or vibrate excessively,

and that it drains well during the spin cycle.
- If water leaks during water supply, see page

14, Connecting the water lines to connect them

properly.

- If the washing machine rocks and vibrates

excessively, see page 16, Leveling the washing

machine to level it again.

- If the drain does not work, see page 15,

Connecting the drain line to install the drain line

properly.

Advertising