LG WM3570HWA - Manual (Page 26)

26 USING YOUR WASHING MACHINE
Adjusting the melody and button tones,
Signal
The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. The melody and
button tones can be changed or they can be
turned off if desired.
1 Press A .
2 Turn
B
to the desired cycle.
3 Press
. Adjust the melody and button
tones as desired.
4 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
5 Press C .
Prewashing, Pre Wash
Pre-wash for 16 minutes when clothes are cov-
ered in dirt or dust. This feature is suitable for
heavily soiled items.
1 Press A and turn B to select the desired
cycle.
2 Press .
- light will turn on.
3 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
4 Press C .
Rinse, drain and spin only, Rinse+Spin
Use this cycle to rinse detergent from the load.
1 Press A and turn B to select the desired
cycle.
2 Press .
3 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
4 Pulse C .
Adding extra rinse cycle, Extra Rinse
You can add an extra rinse cycle to the default
rinse cycle.
1 Press A and turn B to select the desired
cycle.
2 Press .
- light will turn on.
3 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
4 Press
C
.
Presetting the start time, Delay Wash
You can set the desired start time.
1 Press A and turn
B
to the desired cycle.
2 You can now modify other cycle settings and
add options (see page 25-28).
3 Press repeatedly to select the desired
start time.
-
light will turn on.
- The set start time appears on the display
panel.
- Each press of the button increases the delay
time by one hour, up to 19 hours.
4 Press C .
High temperature, Steam
Adding the Steam option to these cycles help to
enhance washing performance.
By using a hot steam fabrics get the cleaning
benefits of a super hot wash.
1 Press A and turn
B
to select the desired
cycle.
2 Press . The washer will automatically
adjust the cycle settings.
3 Set any other desired options.
4 Press C .