LG 27LS5400 - Manual (Page 23)

ENGLISH
15 ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
Leave a 10 cm(minimum) space from the wall
for proper ventilation.
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
10 cm
10 cm
10 cm
10 cm
WARNING
y When you adjust the angle, do not hold the
buttom of the TV frame as shown on the
following illustration, as may injure your
fingers.
CAUTION
y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
y Disconnect the power cord first, and then
move or install the TV. Otherwise electric
shock may occur.
NOTE
y Tilt from +20 to -5 degrees up or down to
adjust the angle of the TV to suit your view.
Front Rear
+20 -5