Aruba Networks Access Point Aruba AP 60/61 - Manual (Page 26)

AP Deployment
Chapter 3
22 Aruba AP 60/61 0500160
Installation Guide December 2005
The Aruba AP 60/61 can be mounted on a wall or suspended from above (not
shown) using one of the optional mounting kits (dimensions vary) in the
following ways:
F IGURE 3-1 Aruba AP 60/61 Mounting Options
N OTE : For dimensions, see Appendix C, “Product Specifications” . Allow 5
cm (2") additional space on the right-hand side for cables.
Measurements for the Aruba 60 depend on attached antennas,
which vary.
Aruba 60 Detachable Antennas
Before deploying the Aruba 60, attach the appropriate antennas (not included).
The antenna connections should be tightened by hand to avoid overtightening.
The Aruba 60 has dual Reverse Polarity SMA (RP-SMA) female antenna
connectors that accept a variety of high-gain detachable antennas. See
Table 3-1
for the list of FCC approved antennas tested for use with the Aruba 60.
Make sure that all external antennas and their associated wiring are located
entirely indoors. The Aruba 60 Access Points and their optional external antennas
are not suitable for outside use.
1 2
3