Aruba Networks Access Point Aruba AP 60/61 - Manual (Page 30)

AP Deployment
Chapter 3
26 Aruba AP 60/61 0500160
Installation Guide December 2005
Using the Built-In Mounting Slots
The keyhole-shaped slots on the back of the Aruba AP 60/61 can be used to
attach the device upright to an indoor wall or shelf.
To hang the Aruba AP 60/61 upright using the mounting slots, perform the
following steps.
1. Install two screws in the wall or shelf as shown in Figure 3-3 :
F IGURE 3-3 Mounting Screw Specifications
If attaching the device to drywall, we recommend using appropriate wall
anchors (not included) as shown in
Figure 3-4 on page 27 .
C AUTION : Do not use the mounting slots to hang the Aruba AP
60/61 from the ceiling, sideways, or in any place where it
could fall on people or equipment. For more secure
installation, use one of the optional mounting kits.
Screw/Nail Positions
(fastened to wall or shelf)
12.7 cm
(5.00")
0.12"
0.27"
0.23"
0.05"
clearance
from surface
3.0 mm
5.8 mm
0.08"
0.15"
clearance
from surface
2.0 mm
3.8 mm
clearance
from surface
1.3 mm
clearnace
from surface
7.0 mm
Maximum Minimum
Screw/Nail Dimensions