Asus AP3000 - Manual (Page 17)

17
IV. Hardware Setup
IV
. Hardware Setup
AP 3000 Hardware Reference Guide
Panel Screws
The top panel on the chassis is
secured by two screws on the
back of the server. To open the
top panel, remove the screws
with a screw driver.
NOTE: You do not have
to open the top panel before
removing the left panel.
The side panels are secured by
two large thumb screws on the
front of the server, which can
be turned with your fingers.
Removing the
Right Panel
To remove the right panel, the
front door must be removed by
pushing down on the hinge
spring.
Opening the Chassis
• 4-1. Opening the Chassis
This section gives descriptions of how to install and remove components.
When setting up devices on the server, perform the following steps.