Asus AP3000 - Manual (Page 24)

24
IV. Hardware Setup
IV
. Hardware Setup
AP 3000 Hardware Reference Guide
• 4-5. Chassis Intrusion Switch
IMPORTANT
Chassis Intrusion Switches
(one on each side)
Cable
The chassis provides a micro toggle switch that must be connected to
the motherboard for the chassis intrusion detection to work. The moth-
erboard will signal the ASMA software when the side panel is opened.
The connection diagram is given here.
Chassis Intrusion Switch
To prevent misconnection, one pin is removed from the
motherboard’s chassis intrusion connector.
Motherboard’s
Chassis Intrusion Connector
from the two Chassis
Intrusion Switches
+5VSB
Chasis Signal
GND