Specifications, Indication for cd changer, Hi temp error - 01 error - 02 no magzn no disc – Alpine TDM-7581R User Manual

Page 21

Advertising
background image

19

-EN

Indication for CD Changer

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject

button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.

• Magazine ejection not possible.

- Press the magazine eject button. If the magazine does

not eject, consult your Alpine dealer.

• A disc is left inside the CD Changer.

- Press the Eject button to activate the eject function.

When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer to
receive the disc left inside the CD Changer.

• No magazine is loaded into the CD Changer.

- Insert a magazine.

• No indicated disc.

- Choose another disc.

HI TEMP

ERROR - 01

ERROR - 02

NO MAGZN

NO DISC

Specifications

FM TUNER SECTION

Tuning Range

87.5 – 108.0 MHz

Mono Usable Sensitivity

0.7 µV

50 dB Quieting Sensitivity

1.1 µV

Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio

65 dB

Stereo Separation

35 dB

MW TUNER SECTION

Tuning Range

531 – 1,602 kHz

Sensitivity (IEC Standard)

25.1 µV/28 dB

LW TUNER SECTION

Tuning Range

153 – 281 kHz

Sensitivity (IEC Standard)

31.6 µV/30 dB

TAPE PLAYER SECTION

Tape Speed

1-7/8 ips (4.8 cm/sec) ±0.7%

Wow & Flutter

0.06% WRMS

Signal-to-Noise Ratio
With Dolby B-TYPE NR
(TDM-7583R only)

68 dB

Without Dolby NR

60 dB

Frequency Response
With Alpine Test Tape

30–20,000 Hz

REMOTE CONTROL

(TDM-7583R only)

Battery Type

AAA batteries (2 pcs.)

REMOTE CONTROL SIZE

(TDM-7583R only)

Width

56 mm (2-1/4")

Height

14 mm (9/16")

Depth

105 mm (4-1/8")

Weight

50 g (1.8 oz)

GENERAL

Power Requirement

14.4 V DC
(11–15 V allowable)

Maximum Power Output*

45 W

×

4

Maximum Pre-Output Voltage 2 V/10k ohms
Bass

±15 dB at 30 Hz

Treble

±10 dB at 10 kHz

Weight

1.4 kg (3 lbs. 1 oz)

CHASSIS SIZE

Width

178 mm (7")

Height

50 mm (2")

Depth

155 mm (6–1/8")

NOSEPIECE SIZE

Width

170 mm (6–3/4")

Height

46 mm (1–13/16")

Depth

19 mm (3/4")

* Under maximum operating voltage and input signal, into 4

ohms.

Due to continuous product improvement, specifications and
design are subject to change without notice.

Advertising
This manual is related to the following products: