ATTO Technology FC-44ES - Manual (Page 46)

x ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual
Appendix F Safety, Warranty
All ATTO host adapter products have been tested to meet applicable safety standards when operated in proper
electrical and thermal environments.
Safety
Please review the specifications for your specific host adapter before installing and operating it in any computer
system to ensure compatibility.
Installation
Before installing an ATTO host adapter product into your computer system, unplug the computer from its electrical
power source and allow adequate time for electrical discharge and the internal components to cool down before
removing the computer system cover. This will decrease the risk of personal injury from electrical shock or
touching the hot surface of an electrical component.
Once an ATTO host adapter is installed in a computer system, the computer cover must be reinstalled properly
before turning the computer system back on.
Operation
ATTO host adapters require adequate cooling to function properly. If you have any questions as to the airflow
provided by your computer system, please refer to your computer system manual or contact your computer
system manufacturer.
To facilitate proper air circulation, ATTO host adapters should never be operated in a computer system without
the cover installed or with an inoperable fan as this may cause safety or thermal problems which could damage
the ATTO host adapter and void the warranty.
ATTO Technology, Inc. limited warranty
ATTO Technology, Inc. warrants to the original purchaser of this product that it is free from defects in material and
workmanship as described in the ATTO Technology website,
www.attotech.com , for three years.
ATTO Technology, Inc. liability shall be limited to replacing or repairing, at its option, any defective product. There
is no charge for parts or labor should ATTO Technology, Inc. determine that this product is defective.
Products which have been subject to abuse, misuse, alteration, neglected, or have been serviced, repaired or
installed by unauthorized personnel shall not be covered under this warranty provision. Damage resulting from
incorrect connection or an inappropriate application of this product shall not be the responsibility of ATTO
Technology, Inc. Liability is limited to ATTO Technology, Inc.product(s); damage to other equipment connected to
ATTO Technology, Inc.product(s) is the customer’s responsibility.
This warranty is made in lieu of any other warranty, express or implied. ATTO Technology, Inc. disclaims any
implied warranties of merchantability or fitness for a particular purpose.
ATTO Technology, Inc. responsibility to repair or replace a defective product is the sole and exclusive remedy
provided to the customer for breech of this warranty. ATTO Technology, Inc. is not liable for any indirect, special,
incidental, or consequential damages irrespective of whether ATTO Technology, Inc. has advance notice of the
possibility of such damages.
No ATTO Technology, Inc. dealer, agent or employee is authorized to make any modification, extension or
addition to this warranty.