Avaya VF 3000 User Manual

Page 42

Advertising
background image

6.2.3.

Configuring the Juniper NetScreen-25 Firewall


This Section assumes that Juniper NetScreen-25 Firewall basic provisioning has been performed.
Refer to [1] for more information. Refer to section 6.1.3 for Netscreen-25 Firewall login
procedures and for common configuration parameters for Virtual Router (trust-vr).

Step 1. Create a Virtual Router for enterprise site B (VR-B). From the left pane click on
Network Æ Routing Æ Virtual Routers. On the right pane, click the New button on the top
right hand corner to create a new Virtual Router. Set Virtual Router Name and leave all other
options as default values and click OK. Figure 33 shows the result of the configured Virtual
Router (VR-B). Refer to [1] for additional configuration information.

Figure 33




TC; Reviewed:
PV 04/24/2006

Avaya – Proprietary

Use as authorized only pursuant to your signed agreement or

Avaya policy. No other disclosure is permitted or authorized.

42 of 61

HT3-LSP-VF.doc

Advertising