Avaya VF 3000 - Manual (Page 45)

Step 4. Configure Interface with Mapped IP (MIP). The physical interface toward enterprise site
B is configured using sub-interfaces. The physical interface toward the Data Center does not use
sub-interfaces. From the NetScreen-25 Firewall Web Admin screen, click on Network Æ
Interfaces, and select Sub-IF on drop down menu then click the New button from the right hand
window pane. Create Sub-Interface ethernet2.3, zone VRB-Untrust. Configure Interface for
Zone Name, IP Address, VLAN Tag, Interface Mode and Service Options as shown in Figure 36
and leave all other options as default values and click OK.
Figure 36
TC; Reviewed:
PV 04/24/2006 Avaya – Proprietary
Use as authorized only pursuant to your signed agreement or
Avaya policy. No other disclosure is permitted or authorized.
45 of 61
HT3-LSP-VF.doc