ADS Technologies HDUP-1500 - Manual (Page 18)

HDTV UpConverter 18
English
Functions
Using your HDTV UpConverter for the fi rst time
1.) Connect your video sources (VCR, DVD player, Laser Disk player, Cable TV, etc.) as
shown previously in the confi guration drawings.
2.) Use the HDTV Component video cable (supplied) between the UpConverter and the
High Defi nition Component Video inputs on your video display device (HDTV Ready TV,
LCD TV, Plasma screen, projector, etc.).
3.) Connect the AC Power cable to your AC outlet
4.) Turn on your TV or video display device.
5.) Select the HD Component video inputs on your TV or Video device as your video
source. (check owners manual of your display device).
6.) Press the Power Button on the HDTV UpConverter or the PWR button on the remote
control to initialize the device. The fi rst time the unit is powered up the VFD display
will show the following text: “ADS Tech HDTV UpConverter” and then it will display the
fi rmware version “Firmware Version 1.00.45”
7.) The UpConverter will then search for a video input with an active video signal.
8.) The VFD Display will show the current video input source and output resolution.
9.) You can use the “Source” button on the front of the UpConverter to toggle through the
video sources to select a different video source, or use the Remote to select a video
source: Press the “Input” button followed by the source number (1 – 10) to jump to a
video source.
10.) You should now see your video source displayed on your TV or video display device.