ADS Technologies HDUP-1500 - Manual (Page 26)

HDTV UpConverter 26
English
Functions
Video Input Setup
In this menu you can make changes to the Main and PiP video sources, the input format of
the video content
- Main and PiP Input selection
Changes you make from the remote control will be represented here as well. You
can set the PiP source from this menu but only valid Main/PiP confi gurations will be
allowed, see Appendix B for Main/Pip selection chart.
- Main and PiP Format
The default setting for both is Auto. In Auto mode the HDTV UpConverter will
detect the aspect ratio of the incoming signal. Using the remote control you can
over-ride this and set the input format to 4:3, FS Letterbox, 16:9.
*If FS Letterbox is used while viewing TV, the TV image will overscan and cut off.a
portion of the TV image.
Output Settings
This menu allows you to confi gure your output resolution that will be sent to your display device*, and
the aspect ratio of the video being displayed.