ADS Technologies HDUP-1500 - Manual (Page 28)

HDTV UpConverter 28
English
Functions
TV Channel Setup
This menu allows to Auto-Scan the available TV channels and create a TV tuning list in the
UpConverter. You can also easily add or delete channels you may not want to view. The TV
Setup menu also allows you to set up your 5 Favorite TV channels (accessed by the Favorite
button on the remote) and up to 16 PiP channels that are displayed in PiP modes.
Auto-Scan TV Channels -
Adding and Deleting Stations from the Channel List
Use the remote Control as follows:
Delete TV Channel from Channel list 0 + TV Channel (0 + 3 deletes Ch. 3)
Add TV Channel to Channel list Enter channel number (14 adds Ch. 14)
PiP Setup
This menu allows you to open a PiP window, set the PiP mode, set the aspect ratio of the PiP
window (4:3 or 16:9), change the horizontal and vertical position of the PiP window on your
video display and use Alpha blending to set the transparency of the PiP window.
You can also use the PiP and PiP Mode buttons on the remote control to Open and Close
a PiP window and cycle through available PiP modes. When a Single PiP window is on the
screen you can use the Left or Right buttons to move the PiP Window to set locations on the
Video display.