Avenview SW-DVI-16X16 - Manual (Page 10)

www.avenview.com 10
2.1.6 Test Signal Board
1. The output resolution is up to the two bits of DIPs on the test signal board.
DIPS BIT 1 BIT2
OFF OFF Output Resolution: 1600x1200x60Hz
OFF ON Output Resolution: 1280x1024x60Hz
ON OFF Output Resolution: 1280x960x60Hz
ON ON Output Resolution: 1152x864x75Hz
2. Signal type Button: There are four kinds of signal saved in the test signal board, namely color vertical
bar, white-black vertical bar, chessboard-grid and white-black vertical line. Press the button you can
choose the signal you need.
3. Output channel 17 has the same function as the former 16 output channels.
Example: Set Output Channel 17 to be 1600x1200 and Color Vertical Bar
1. Unlock the panel if the panel locked.
2. Press the I/O button and the LED displays the I/O menu. Set both the output channel and the
input channel to be 17 with the I/O button and the ENTER button.
3. Press the I/O button or the ENTER button will tie output channel T1 to input channel T1.
4. Set the DIPs to be Bit 1 OFF and Bit 2 OFF.
5. Press the Signal type Button to set the signal to be color vertical bar.
6. IF no other operation on panel, press LOCK button to lock the panel.
Example: Set Output Channel 17 to be 1280x1024 and Chessboard Grid
1. Unlock the panel if the panel locked.
2. Press the I/O button and the LED displays the I/O menu. Set the output channel to be 3 and the
input channel to be T1 with the I/O button and the ENTER button.
3. Press the I/O button or the ENTER button will tie output channel 3 to input channel T1.
4. Set the DIPs to be Bit 1 OFF and Bit 2 OFF (Resolution: 1280Ч1024Ч60Hz).
5. Press the Signal type Button to set the signal to be chessboard-grid.
6. IF no other operations on panel, press LOCK button to lock the panel.