Avenview SW-DVI-16X16 - Manual (Page 19)

www.avenview.com 19
Note: The range of Output Number is as same as the Note 2 of command 0x02
For example： Tie an appointed output channel to the Preset Input Channel
Commands: 0xeb, 0x90, 0x06, 0x01, 0x04
Response: 0xeb, 0x90, 0x06, 0x01, 0xfa, Redundancy
Explanation: The output channel 5 has been tied to the Preset Input Channel.
8. Command 0x0c
Function 1 Recode Macro
Format
0xeb, 0x90, 0x0c, N, 0x00, Macro Number, Output Number 0
，Input Number 0，…，Output Number N，Input Number
N， Redundancy
Response 0xeb, 0x90, 0x0c, 0x01, 0xfa, 0x0f
Note: The range of N is the even from 0x02 to 0x22
For example：Recode the Macro 1
Commands: 0xeb, 0x90, 0x0c, 0x06, 0x00, 0x00, 0x01, 0x01, 0x02, 0x02,
Response: 0xeb, 0x90, 0x0c, 0x01, 0xfa, Redundancy
Explanation: In this Macro, the Macro number is 1, the output channel 2 、3 is tied to the input
channel 2、3 respectively and other output channels are ignored
Function 2 View Macro
Format 0xeb, 0x90, 0x0c, 0x02, 0x02, Macro Number
Response
0xeb, 0x90, 0x0c, N, Macro Number，Output Number 0，
Input Number 0，…，Output Number M，Input Number M
， Redundancy
Note: The range of Macro Number from 0x00 to 0x10
Note: The range of N is an odd from 0x01 to 0x21
For example： View Macro Number 1
Commands: 0xeb, 0x90, 0x0c, 0x02, 0x02, 0x00
Response: 0xeb, 0x90, 0x0c, 0x05, 0x00, 0x01, 0x01, 0x02, 0x02, Redundancy
Explanation: In the Macro number 1: the output channel 2 、3 is tied to the input channel 2、3
respectively and other output channels are ignored.
Function 3 Recall Macro.
Format 0xeb, 0x90, 0x0c, 0x02, 0x01, Macro Number
Response 0xeb, 0x90, 0x0c, 0x01, 0xfa, 0x0f
Note: The range of Macro Number is from 0x00 to 0x10.
For example： Recall Macro Number 1
Commands: 0xeb, 0x90, 0x0c, 0x02, 0x01, 0x00
Response: 0xeb, 0x90, 0x0c, 0x01, 0xfa, Redundancy
9. Command 0xfd (three functions)
Function 1 View the status of switching EDID
Format 0xeb, 0x90, 0xfd, 0x02, 0x02, 0x00
Response 0xeb, 0x90, 0xfd, 0x10, the EDID mark of the input