HP Laserjet 1200 - Manual (Page 49)

EN Installing and configuring the network software 47
Installing and configuring the network software
The installation program on the printer CD-ROM provides the
easiest and fastest way to set up your print server, along with
your printer.
The CD-ROM contains software, documentation, and registration
for your print server as well as your printer. Using this
information, you can perform the following tasks:
● Quickly install the print server software
● View documentation for your print server
● Register your print server via the Internet
For additional options, see the appropriate sections in this
chapter.
Install the software on a network
The installation program on the CD-ROM guides you through the
basic configuration of your print server, along with your printer.
Note If you purchased a print server separately, make sure that you install
the print server using the software found on the CD-ROM that came
with your printer. Do not use the HP JetDirect CD-ROM that came with
your print server. If you have already installed the printer using the
“Direct Connect” option, you must uninstall the printer software and run
the printer software again, using the “Connected to the network” option,
to ensure that all print, copy, and scan features function properly.
Install the printer and server
1 Quit all open applications.
2 Insert the CD-ROM into the CD-ROM drive. When the
welcome screen displays, follow the directions on the screen.
When asked how the printer will be connected, select
Connected to the network, and click Next.
Note If the welcome screen does not display, click Start, and Run. Type
x:setup (where x is the letter of your CD-ROM drive), and click OK. If
it does not display in Macintosh, double-click the CD icon in the desktop,
then double-click HP All-In-One Installer.