HP Laserjet 1200 - Manual (Page 172)

170 Chapter 11 Troubleshooting the print server EN
Auto Negotiation Specifies if IEEE 802.3u Autonegotiation on the 10/100TX
port is enabled (on) or disabled (off):
On: The print server tries to automatically configure itself onto
the network at the proper speed (10 or 100 Mbps) and mode
(half or full duplex).
Manufacturing ID The manufacturing identification code for use by HP Customer
Care personnel.
Date Manufactured The date that the HP JetDirect print server was manufactured.
SNMP Set Cmty Name Specifies if an SNMP set community name has been
configured on the print server. An SNMP set community name
is a password for write access to SNMP control functions
(SNMP SetRequests) on the print server.
Not Specified: An SNMP set community name has not been
configured.
Specified: An SNMP set community has been configured.
Port 1 * Heads the section for the USB printer class descriptor
information supplied by the printer’s manufacturer. The
number and asterisk, 1 *, means that the configuration and
diagnostic pages are printed on the printer attached to this
print server port 1. See
USB port information for more
information.
Message Description