HP Laserjet 1200 - Manual (Page 136)

134 Chapter 9 Troubleshooting the printer EN
Changing the printer separation pad
Note
Before you change the separation pad,
clean the pickup roller. See
Cleaning the
pickup roller for instructions.
If your input tray feeds more than one
page at a time, you might need to
change the printer separation pad.
Recurring feed problems indicate that
the printer separation pad is worn. See
Accessories and ordering information to
order a new printer separation pad.
1 Unplug the power cord from the
printer, and allow the printer to cool.
2 Remove the input trays.
3 Find the blue separation pad.
4 To pry the separation pad up from
the spring-loaded base, insert a
flat-edged screwdriver in the slot
under the separation pad and twist
until the tabs are free.
Continued on next page.
1
2
3
4