HP Laserjet 1200 - Manual (Page 51)

EN Starting the embedded web server 49
Optionally, you can use BootP (Bootstrap Protocol) or DHCP
(Dynamic Host Configuration Protocol) to automatically configure
the IP address over the network each time the print server is
turned on.
Compatible Web Browsers
If you use Windows 9x, 2000, Millennium, or NT 4.0, the
embedded web server works with the following browsers:
● Netscape Navigator 4.6x, 4.7, 4.71, and 4.72
● Internet Explorer 4.0, 4.01 with SP2, 5.0, and 5.01
(Millennium requires IE 5.0 or greater)
For the latest list of compatible web browsers, check HP’s
Customer Care online at
http://www.hp.com/support/net_printing .
Starting the embedded web server
After you establish an IP address on the print server, perform the
following steps:
1 Run a supported web browser.
2 Enter the IP address of the print server as the URL. The print
server’s Home page displays.
3 Click the Help link on the web page for more information.
Note If you change the IP address and other parameters, the connection to
the embedded web server closes. To re-establish a connection, use the
new IP address as the URL. Also, some computer setups may no longer
work.
Using HP Web JetAdmin
HP Web JetAdmin is a printer installation and management
application for intranets. You can obtain this software from HP
Customer Care Online at
http://www.hp.com/support/net_printing .
Hewlett-Packard recommends that you use HP Web JetAdmin
version 6.0 or later for operation with the print server’s embedded
web server.