ATTO Technology 1550D - Manual (Page 6)

1
ATTO Technology Inc. iPBridge Installation and Operation Manual
1 ATTO iPBridge Provides Storage Options
The ATTO bridge family of products provides iSCSI-to-SCSI,iSCSI-to-Fibre Channel or Fibre Channel-to-SCSI
bridges available as embeddable boards, stand alone enclosures that can be fitted for rackmount integration, or
desktop units, depending on the model and your needs.
The ATTO iPBridge and ATTO FibreBridge family of
products share common configuration options and
functions to provide the most versatile connectivity
options available. Each product has been engineered
to address specific customer needs. New capabilities
are integrated into products throughout the family as
much as possible, requiring only an upgrade of
firmware to incorporate them into your SAN (Storage
Area Network) or NAS (Network Attached Storage).
The ATTO iPBridge 1550 is a cost-effective way of
expanding your existing storage capacity without
sacrificing performance. The ATTO iPBridge 1550 is
ideally suited to the SME or for corporate IT
departments seeking to expand storage requirements
with minimal disruption while making existing SCSI
equipment accessible over an Ethernet network to all
network users.
To make sure you have the most up-to-date version of
the firmware, visit the ATTO Technology website,
www.attotech.com .
Features
• One independent Gigabit iSCSI port and one
independent Ultra 320 SCSI port
• ATTO ExpressNAV™, integrated web server for
configuration, upgrades, monitoring and
management
• ATTO ExpressWizard, one-button initial setup
for most configurations
• Inband LAN-based monitoring and management
• Command Line Interface (CLI) for configuration
and management
• RS-232 serial port with RJ-11 connector
• Diagnostic
capabilities
• Support for manual and auto LUN mapping
• intelligent Bridging Architecture™ for optimized
performance
• Near wire speed sustained throughput
• Ideal solution for connecting high performance
tape and disk devices to an IP Storage Area
Network (SAN)