Held solo mode – Aviom A-16II User Manual
Page 32
Aviom A-16II Personal Mixer User Guide
24
selected Channel alone without disturbing the rest of the mix. Two types of
Solo mode are available; one functions on a channel by channel basis, the
other (called Held Solo) remains in force until the user exits it.
Solo mode works on the currently selected Channel or Group. To use Solo
mode, first select the Channel you want to hear alone. Its red button LED
should be lit. Now press the
S
OLO
button, found in the pair of buttons in the
upper right corner of the Personal Mixer. The Channel is now heard solo.
You can make changes to volume and panning when a Channel is in Solo
mode. All changes happen immediately. Consider Solo mode as a tempo-
rary state only. You cannot save a Preset with a Channel in Solo mode.
Only one Channel, linked pair (or Group) can be in solo at a time. To exit
Solo mode, simply select another Channel or press the
S
OLO
button again
to exit.
To select a different Channel for auditioning in Solo mode, remember that
you must first select a Channel and then press the
S
OLO
button to enter Solo
mode.
Held Solo Mode
This Solo mode allows Channels to be soloed in succession without exiting
the Solo Mode. This is in addition to the regular Solo Mode behavior that
allows the user to exit Solo Mode by pressing any other interface button
after soloing a Channel. Held Solo Mode is indicated by the flashing of the
Solo LED.
To use Held Solo Mode, you must start from Mix Mode (that is, no Chan-
nels are currently soloed). The Recall, Group, and Solo LED’s should be
off.
To use Held Solo Mode:
• Press and hold the
S
OLO
button.
• While holding down the
S
OLO
button, press and then release
any Channel button.
• You can now release the
S
OLO
button. (If you release the
S
OLO
button before releasing the Channel button, Held Solo
Mode will not be engaged.)
• The Channel that you pressed is now soloed, and the Solo
LED is flashing.
• To solo another Channel, press any other Channel button.
• To exit Held Solo Mode, press the
S
OLO
button again.
You can also exit Held Solo Mode by pressing the
R
ECALL
,
G
ROUP
, or
M
UTE
buttons.