I. introduction – Asus Dual Pentium II Department Server AP2500 User Manual

Page 9

Advertising
background image

AP2500 Hardware Reference Guide

9

I. Introduction

Features

The following are highlights to this server’s many features. For additional
features and details, read the motherboard User’s Manual included with this
server package.

Processor: Dual Intel Pentium II processors provide up to 450MHz on
each processor for extreme server processing speeds.

I2O: Includes Intel’s i960RD I/O processor with 32KB NVRAM,
4x512KB Flash EEPROM, and 2 SIMM slots for up to 256MB of
memory.

Memory: Four DIMM slots with up to 1GB SDRAM with ECC.

Onboard IDE: Up to 33MB/sec IDE transfer with UltraDMA/33.

Chipset: Intel 440BX supports up to 100MHz front side bus.

Onboard LAN: Onboard Intel 10/100Base-TX Fast Ethernet.

Onboard SCSI: Onboard Adaptec 7890 SCSI with three onboard con-
nectors to independently connect 68-pin Ultra2 SCSI devices, 68-pin
Wide-SCSI devices, and 50-pin Narrow-SCSI devices.

SCSI Backplane: Ultra2 SCSI SCA backplane with remote SCSI ID
dip switches and power to support up to 5 Ultra2 SCSI SCA hard drives.

Device Bays: Support one floppy, one CD-ROM, two additional fixed
devices, and five hot-swap SCA hard disk drives.

Onboard Hardware Monitor: Provides information for system and
processor voltages, fan status, temperature, chassis intrusion, and pro-
vides automatic system restart.

ASMA and Intel LDSM: Provides server monitoring, management, and
control.

Onboard VGA: Onboard S3 TrioV2/DX VGA with 1 MB upgradeable
to 2 MB.

I. Introduction

Advertising
This manual is related to the following products: