HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 128)

The SAN Management Application
128 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Configuring Access to the Management Server
An Access Control List (ACL) of WWN addresses determines which systems
have access to the Management Server database. If the list is empty (default), the
Management Server is accessible to all systems connected in-band to the Fabric.
For a more secured access, an administrator may specify WWNs in the ACL.
These WWNs are usually associated with the management applications. If any
WWNs are entered into the ACL, then access to the Management Server is
restricted to only those WWNs listed in the ACL.
Displaying the Access Control List
To display the Management Server ACL:
1. Login to the switch as the admin user.
2. Enter the msconfigure command at the command line. The command
becomes interactive.
3. At the select prompt enter 1 to display the access list.
A list of WWNs that have access to the Management Server are displayed.
Example:
Adding a WWN to the Access Control List
To add a WWN to the ACL:
1. Log into the switch as the admin user.
switch:admin> msconfigure
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 0
done ...
switch:admin>