Anton/Bauer Trimpac 13/14 - Manual (Page 11)

- 9 -
SERVICE
In the unlikely event a Logic Series battery fails to deliver acceptable
performance it must be returned to the Anton/Bauer Service Center that is
the only facility qualified and equipped to service the Logic Series
batteries and calibrate the electronic components and sensors. Any
attempt by the user or any other unauthorized persons to service this
battery will surely result in improper calibration of the electronic
components resulting in severe battery damage and/or safety hazards to the
operator, in addition to voiding any/all remaining unconditional or pro-
rated warranty conditions. Therefore:
1. DO NOT attempt to service this battery under any circumstances.
2. DO NOT send this battery for service to anyone other than the
Anton/Bauer Service Center.
3. DO NOT rebuild this battery - At the end of its useful life contact the
Anton/Bauer Service Center.
4. DO NOT DISPOSE OF THIS BATTERY. This battery contains
sealed Nickel-Cadmium cells and must be disposed of properly.
Anton/Bauer participates in a recycle program that handles Nickel-
Cadmium battery products (see the back page of this manual).