Anton/Bauer Trimpac 13/14 - Manual (Page 5)

- 3 -
TRIMPAC
The lightweight high energy Trimpac battery is the ideal match for the
latest generation of smaller CCD cameras and camcorders. The Trimpac
will provide excellent run times in applications previously using slide-in
type batteries. Run time improvements to 100% are quite common with
the Trimpac.
CHARGING WITH LOGIC SERIES CHARGERS
Charge this battery fully before using. Allow the battery to reach a steady
green (Lifesaver
® ) mode before using. Charging is automatic on all Logic
Series chargers. The flashing red and green lights indicate the charger and
battery are establishing communications. The following are the standard
indications on any Logic Series Lifesaver Charger (Please refer to the
charger manual for complete charger instructions):
• Alternating red and green: Evaluating battery and/or
rejuvenating low voltage battery.
• Steady red: Battery waiting to charge (may either be in line to
charge or holding for temperature stabilization).
• Flashing red: Charging.
• Flashing green: Balancing mode. Battery is typically more the
80% charged.
• Steady green: Lifesaver mode. Batteries will remain 100%
ready for use indefinitely.