Anton/Bauer Trimpac 13/14 - Manual (Page 3)

- 1 -
FEATURES
1. Premium Fast Charge Cells - Unlike conventional cells that are
stressed or damaged by fast charging, these cells are designed
specifically for optimum life and performance.
2. High Voltage Design - The 13.2 or 14.4 volt design of the Logic
Series battery complies precisely with equipment manufacturers’
specifications, eliminating all the problems that cripple 12 volt
batteries.
3. Impac ® Case design - The computer designed high impact case
eliminates conventional stress points. A proprietary internal rib
system cradles each individual cell. These features protect the cells
from impact that would damage or destroy conventional batteries.
4. Gold Mount
®
Interface - The solid metal “H” design mounting studs
assure a smooth, precise mounting for the life of the battery. The
Logic Series connector assembly features multiple gold plated, self
aligning contacts and is compatible with all existing Anton/Bauer
®
camera mounts and accessories.
5. Individual Computer Testing - Like all professional Anton/Bauer
batteries, the Logic Series battery has been individually computer
tested. For assurance of optimum capacity, voltage and overall
quality, a computer print-out is enclosed.
HIGH VOLTAGE DESIGN
Virtually all cameras/camcorders will indicate a low voltage warning or
cease to operate at about 11 volts. Unfortunately, a 12 volt battery must be
discharged to 10 volts for full discharge. Thus, a camera/camcorder
operating on a 12 volt NiCad will always cease to operate before fully
discharging the battery, leaving 50% of the total capacity unused under
certain conditions. The amount of this wasted capacity can vary each day
depending on temperature, etc., thus creating what appears to be totally
inconsistent performance.