Alpine MOBILE MULTIMEDIA STATION IVA-D900 - Manual (Page 31)

29
-EN
Setting of the Subtitle Language
Setting item: SUB T. LANGUAGE
Setting contents: AUTO / ENGLISH / GERMAN / FRENCH /
JAPAN / CODE
Set the language of the subtitles displayed on the screen.
• When “AUTO” is selected, the primary subtitle language among
the recorded ones is played.
To play in a language other than those displayed
1 Press 6 (CODE) of the Function buttons.
Number input box is displayed.
2 Turn the Rotary encoder to input the first digit of the
language number.
As for the language number, refer to “List of language
code” (page 59).
3 Press the Rotary encoder to enter the first digit
number.
4 Repeat steps 2 and 3 to input a 4 digit language
number, then press 6 (ENTER) to memorize the
number.
Changing the Country Code Setting
Setting item: COUNTRY CODE
Setting content: CODE
Set the country code when setting the rating level (Parental lock).
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are not cleared even when the vehicle’s battery is
disconnected.
1 Press 6 (CODE) .
Number input box is displayed.
2 Turn the Rotary encoder to input the first digit of the
country number.
As for the country number, refer to “List of Country
Codes” (page 60).
3 Press the Rotary encoder to enter the first digit.
4 Repeat steps 2 and 3 to input a 4 digit country code,
then press 6 (ENTER) to memorize the code.
Setting the Rating Level (Parental Lock)
Setting item: PARENTAL
Setting content: P-WORD
Use this function to restrict the viewing of movies to children of
appropriate age levels only.
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. Then
settings are not cleared even when the vehicle’s battery is
disconnected.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs
accessible to young children for whom you deem them
inappropriate.
1 Press 1 (P-WORD).
Number input box is displayed.
2 Press 0 to 9 on the supplied remote control to input the
password.
The initial number is 1111.
Input a 4 digit pass word.
Input numbers are displayed as “
∗”.
3 Press 1 (ENTER) to memorize the number.
The PARENTAL screen appears.
Set the rating level of PARENTAL
4 Turn the Rotary encoder to select PARENTAL LEVEL.
5 Press 1 (;DN) or 2 (UP :) to select the rating level
(1 to 8).
Select “8” to cancel the parental lock or if you do not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Press 7 (RETURN) to return to the previous screen.
Changing the password
4 Turn the Rotary encoder to select PASSWORD
CHANGE.
5 Press 1 (P-WORD).
6 Turn the Rotary encoder to input numbers, then press
the Rotary encoder to enter a new 4 digit pass word.
• Keep a note of the number somewhere safe in case you should
forget it.
7 Press 1 (ENTER) to memorize the number.
8 Press 7 (RETURN) to return the previous screen.
Changing the rating level temporarily
Some discs may request that you change the rating level set
in the default settings during playback. In this case, the
message appears on the monitor screen “PARENTAL LEVEL
CHANGE OK? <YES/NO>.”
If this screen appears, change the level as follows:
• To change parental level and play, press 2 (: : : : :/J J J J J).
• To play without changing the parental level, press 4 (L).
(When 4 (L) is pressed, playback will be at the parental
level set with “Setting Parental Lock.” )
Continued