Operating the navigation (sold separately) – Alpine MOBILE MULTIMEDIA STATION IVA-D900 User Manual

Page 57

Advertising
background image

55

-EN

1 NAV. transmission indicator

The transmission indicator lights for a few seconds when
the mode selector switch is set to “NAV.”.

2 DTR (DETOUR) Button

Automatically recalculates route if a road block or traffic
congestion is encountered.

3 LIST Button

Displays list of the streets currently set for the route. To
return to the guidance mode, press the DISP button.

4 DEL. DEST. Button

Deletes current destination.

5 OK button

Executes numeral input and starts searching.

6 N/H Button

Toggles between North UP and Heading UP orientation.

7 CANC. Button

Cancels current display screen and switches back to
previous screen with menus.

8 SCALE UP/DN Buttons

9 VOICE Button

Initiates vocal instruction for next route maneuver or
repeats last instruction.

! MODE Button

Inputs numerals using the numeric keypad, DEL. and +10
buttons.
After pressing the MODE button, the following buttons will
be pressed while the status indicator is blinking: numerals
(0-9), DEL. and +10.

" MODE Change Switch

Sets this switch to the “NAV.” side to operate a connected
Alpine navigation system.

Operating a separately sold TV monitor

• To operate a separately sold Alpine TV monitor, press the mode

change switch on the rear of the remote control unit. Operate while
the transmission indicator is blinking.

• Included remote control unit operation seal: Apply the seal for the

type of TV monitor you are using to the rear of the remote control
unit.

Operation may differ or may not be possible for some

products. Also refer to the product’s operating instructions.

(Rear of the Remote Control)

<

Button

Performs playback.
Press and hold for at least 2 seconds for slow motion
playback.

= BAND Button

Switches the band of Audio or Disc mode.

> MODE Change Switch

When operating the connected DVD player/DVD changer,
switch to the EXT DVD side.

Depending on the disc or playback status, certain operations

may not work. In this case, the

mark is displayed on the

monitor screen.

Operating the Navigation (sold separately)

"

1

9
8

7

6

5

!

4

3

2

Advertising