Aastra Telecom 9133i (INSTALLATION GUIDE) - Manual (Page 13)

Model 9133i Installation Guide 10
Customizing your phone
4 . Clear Message Waiting
Use the W and V to scroll to the
option and press W to delete. The
light flashes again when there are
new messages waiting.
5. Contrast Level *
Use the Change softkey to cycle
through 8 contrast settings, which
brighten or darken the display.
6. Live Dial Pad*
Turn on or off the dial pad mode.
With Live Dial Pad ON, the 9133i IP
Phone automatically dials out and
turns ON Hands free mode as soon
as a dial pad key is pressed. With
Live Dial Pad
OFF, you must dial
the number first and then lift the
handset or press the e before the
number is dialed. Press the e to
turn the dial pad mode on or off.
7. Headset Settings
The 9133i allows you to use a
handset, a headset or handsfree to
handle incoming and outgoing
calls. This option provides different
combinations of these three
methods to provide maximum
flexibility in handling calls. There
are four options to choose from:
• Handsfree — this is the default
setting. Calls can be made or
received using the handset or
handsfree speakerphone and can
be switched between the two
modes by pressing the e but-
ton on the phone. When on
handsfree, you can return to
using the handset by placing the
handset on the cradle and pick-
ing it up again.
• Headset — choose this setting if
you want to make or receive all
calls using a headset. Calls can be
switched between the headset
and handset by pressing the e
button on the phone.
• Spkr/Hset — incoming calls are
sent to the handsfree speaker-
phone. By pressing the e but-
ton on the phone you can switch
between the handsfree speaker-
phone, the headset and the hand-
set.
• Hset/Spkr — calls are sent to the
headset. By pressing e the
button on the phone you can
switch between the headset,
the handsfree speakerphone
and the handset.
Additional settings in the options
menu are specific to the firmware
version you have in your 9133i IP
Phone.
8. Network Settings
This a system administrator level
only option, and requires a
password to access. See the 9133i
Administrator Guide for details.
9. SIP Settings
This a system administrator level
only option, and requires a
password to access. See the 9133i
Administrator Guide for details.
10 . Phone Status
See “Status Lights” on page 11.
Talk to your System Administrator
before changing your phone
settings.
*Availability of feature dependant on
your phone system or service provider or
version of the 9133i you are using.