Aastra Telecom 9133i (INSTALLATION GUIDE) - Manual (Page 4)

1 Model 9133i Installation Guide
Introduction
Introduction
Congratulations on your purchase of the Model 9133i IP Phone! The 9133i
communicates over an IP Network, allowing you to receive and place calls in
the same manner as a regular business telephone. This release of the 9133i is
capable of supporting the SIP protocol.
Phone Features
• Three line adjustable backlit display screen
• 3 line/call appearance buttons with corresponding lights
• 7 programmable keys with lights - can be programmed as speed dials/
memory keys, or additional Line/Call appearances
• Speakerphone for handsfree
• Built-in-two-port, 10/100 Ethernet switch which lets you share a connec-
tion with your computer
• Inline power support, which eliminates power adapters.
Requirements
• SIP based IP PBX system or network installed and running with a num-
ber created for the 9133i phone.
• Access to a Trivial File Transfer Protocol (TFTP) server.
• 802.3 Ethernet/Fast Ethernet LAN.
• Category 5/5e straight through cabling.
• Power over Ethernet (PoE) power supply (optional accessory - necessary
only if no inline power is provided on the network).
About This Guide
This manual describes how to physically set up your new 9133i. Not all
features listed are available by default and some may depend on your phone
system or service provider. Contact your system administrator if you have
any questions on what features and services are available to you on your
system. This guide complements the
Aastra Model 9133i Administrator Guide
and the Aastra Model 9133i User Guide .
Aastra Model 9133i Administrator Guide – is designed for network
administrators, system administrators, developers and partners who need
information on installing this product on an IP network.
Aastra Model 9133i User Guide – explains the most commonly used IP
telephone features for an end user.
These guides along with release notes, system updates, etc. can be
downloaded from our website at www.aastra.com/EnterpriseIP