HP Latex 360 Printer - Manual (Page 130)

5. Lift the cartridge out of its drawer.
NOTE: Avoid touching the end of the cartridge that is inserted into the printer, because the connection
might be coated with ink.
NOTE: If necessary, store a partially-used ink cartridge in the same position as if it were inserted in
the printer. Avoid using a partially-used cartridge that has been stored on its end.
6. The front-panel display identifies the missing ink cartridge.
Insert an ink cartridge
1. Pick up the new ink cartridge and find the label that identifies the ink color. Hold the ink cartridge so
that you can see the label at the top of the side that is facing you.
2. Check that the colored label above the empty slot in the printer matches the color of the label on the
cartridge.
3. Shake the cartridge vigorously for about 15 seconds.
124 Chapter 7 Hardware maintenance ENWW