HP NonStop G-Series - Manual (Page 121)

Managing Catalogs 11-4
Figure 11-2. Create Catalog Window.
Assign a Name and Volume
To create a new user catalog
1. Type the new catalog name in the first field next to the Catalogs icon.
2. To choose the volume and node where the catalog is located, do one of
the following:
• Enter the node name and volume in the second field next to the
Catalogs icon.
• Click on Volumes at the bottom of the window to display the Select
Volume window, as shown in Figure 11-3. To select the volume,
click on the volume name in the Volume Name field and click OK.
Figure 11-3. Select Volume Window.
Save the Catalog
To save the catalog you just created, click on one of the following:
• Execute. Executes the command immediately.