Memory card troubleshooting, Ra, or storage device, see, Memory card – HP Photosmart C4380 All-in-One Printer User Manual

Page 128

Advertising
background image

Ink is spraying the inside of the HP All-in-One when I print a photo

Cause: The borderless print settings require photo paper to be loaded in the input
tray. You are using the wrong paper type.
Solution: Make sure you load photo paper in the input tray before you print a
borderless print job.

Memory card troubleshooting

Use this section to solve these memory card problems:

My memory card no longer works in my digital camera

The HP All-in-One does not read the memory card

The Photo light next to the memory card slots is blinking

The On light blinks when I insert my memory card

The photos on the memory card do not transfer to my computer

Memory card is not available

The file name appears as meaningless text

Other users on the network can access my memory card

Error message: Cannot find the file or item. Make sure the path and file name are
correct.

My memory card no longer works in my digital camera

Cause: You formatted the card on a Windows XP computer. By default, Windows
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.
Solution: Reformat your memory card in your camera or format your memory card
in a Windows XP computer by selecting the FAT format.

The HP All-in-One does not read the memory card

Cause: The card is inserted backwards or upside down.

Solution: Turn the memory card so that the label side is up and the contacts are
facing the HP All-in-One, and then push the card forward into the appropriate slot until
the Photo light turns on.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the Photo light (near the memory card slots) will not turn on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.

Cause: The card is not fully inserted.

Solution: Make sure you fully insert the memory card into the appropriate slot on
the HP All-in-One.

Memory card troubleshooting

127

Trou

bles

ho

ot

ing

Advertising