HP StorageWorks XP Remote Web Console Software - Manual (Page 14)

14 Auto LUN XP for the XP128/XP1024
Keep reserved volumes in high HDD classes
When parity groups in the highest HDD classes start to run out of reserved (empty) volumes, Auto LUN XP
maintains available reserve volumes by automatically migrating low-usage volumes from higher HDD class
groups to lower HDD class groups.
Figure 1 Moving volumes to another class based on usage
The auto migration function can move a high-usage volume to a higher HDD class group, forcing a
low-usage volume out of that HDD class group. To do so, the auto migration function requires a minimum of
5% difference in estimated disk usage between the two volumes. If the difference is less than 5%, this
migration is considered ineffective and the volume is not moved.
Figure 2 Auto migration function example 1
The auto migration function can also move a volume from one parity group to another group of the same
HDD class, forcing another volume out of the destination parity group. To do so, the auto migration
function requires a minimum of 20% difference in estimated disk usage between the two volumes. If the
difference is less than 20%, this migration is considered ineffective and the volume is not moved.
Figure 3 Auto migration function example 2
Auto migration sequence of events
The following are the typical steps to set up an auto migration plan:
1. Analyze monitor data. You specify the monitor data term to be analyzed.
2. Make auto migration plan. You specify the auto migration plan’s parameters.
3. Perform auto migration plan. You specify when the auto migration plan is executed.