Removing an enclosure – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 181
Advertising
Virtual Connect modules 181
Row
Description
Blade Bays
Number of device bays in the enclosure
Interconnected Trays
Number of interconnect trays in the enclosure
Removing an enclosure
To remove a remote enclosure from the domain:
1.
Disassociate all profiles, networks, port sets, and port monitors from the enclosure.
If the enclosure is currently in a No-COMM state, the remote enclosure remains in VC mode. The
No-COMM condition must be repaired prior to the enclosure removal.
2.
Take the enclosure out of VC mode manually with the Onboard Administrator command line for that
enclosure.
3.
Click Remove Enclosure.
Advertising
This manual is related to the following products: